Frequently Asked Questions
Planning & Purchasing a Cold Storage Door
How do you measure a cold storage door?
Cold storage doors are measured and described by the dimensions of the clear opening. The door panel and frame will generally overlap this clear dimension by several inches.
How much does a cooler or freezer door cost?
Depending on the application, a cold storage door can be as inexpensive as $650 or as high as $20,000.
What should I consider when purchasing a low temperature door?
- What is the opening size? (Width and Height of Opening)
- What type of traffic will be going through the door?
- What is the opening size in relation to the product passing through the opening?
- What is the traffic flow pattern going through the opening?
Why does traffic flow matter?
The traffic flow pattern will:
- Help determine the product to be used
- Insures unimpeded travel
- Insures that the installation is safe
- Insures that the product will perform properly
How wide of a load can pass through the opening?
For doors with vehicle traffic, the max load should have at least 12″ clearance in each direction to the inside of your opening.
Door Terminology & Concepts
What does egress mean?
The ability to exit an opening without obstruction.
What does entrapment mean?
In relation to sliding doors, it is the ability to “move” a closed or stopped door in order to exit the area in an emergency.
Door Systems & Construction
What is a casing mounted door?
A “Casing Mounted” Door System is a door that includes a frame or set of casings or frames that mount to the wall. All of the door system components including the track, operator and gasketing mounts to the casings, with the exception of the swing door. Virtually all sliding cold storage doors and many swing doors are casing mounted.
What are mirror casings?
Cold Storage Doors frequently mount to non-structural foam panel walls. In these installations, there is no structure to attach the door to. Mirror Casings are used to support the door system on the interior of the cooler/freezer box. A Jamb Wrap can also be added to cover the jamb area between the casing and mirror casing to finish out the door frame.
What is a thru-wall casing?
In applications where the door is installing in a rough opening, thru-wall casings can be used to finish the opening. This type of casing wraps around the frame to create a finished opening on both sides of the wall, as well as the jamb.
Electrical & Technical Requirements
What voltage do your door operators require?
Voltage options range from 115/1/60 to 460/3/60.
What voltage does the heat cable require?
115-voltage.
Are freezer doors heated on all four sides?
In Freezer Applications, heat is required around the perimeter of the freezer door system to prevent icing and the panel “freezing shut” when not in use. Freezer Doors are equipped with a perimeter heat cable to prevent this freezing. The freezer door panel is heated on all 4 sides. Swing doors are heated on 3 sides with optional bottom bar heat or heated threshold for the floor.
Installation & Shipping
How are the products packaged?
Custom packaging for each door insures safe arrival at the installation site. All Eco-Cold low temperature doors are quick and easy to install. All doors ship complete with a casing system, reducing installation time. Most components are pre-assembled, reducing field labor and eliminating potential installation errors. Motor operated doors are assembled and bench tested to insure maximum performance right out of the box.
Product Limitations
What voltage do your door operators require?
Voltage options range from 115/1/60 to 460/3/60.